Seal blow holes and repair defects: instantly done, controlled curing, directly machinable. The
versatile metal repair system for filling blow holes, hollow spaces, defects and machining
errors in all cast-iron, steel and metal alloys.
Plasticmetal from DIAMANT Metallplastic is a quick-curing polymer-bound metal
repair system for the reliable filling of blow holes as well as small and medium-size defects.
The preferred solution in the worldwide industry for reducing scrap rates in the manufacture of
cast parts. Due to its particularly high content of genuine metal fillers, plasticmetal exhibits
a very good metal finish and can be machined and manually worked like metal.
Plasticmetal was specially developed for demanding industrial use and is thus highly resistant
to physical, thermal and chemical influences. According to modern standards, Plasticmetal
reliably fills:
- blow holes
- hollow spaces
- defects
- incorrect bores
- abraded points
- worn points
- cast aluminium
- nodular cast iron
- gray cast iron
- ferro cast iron
- cast iron
14 metal powders and 6 hardeners: freely combinable in a system
As a freely combinable repair system, plasticmetal from DIAMANT
Metallplastic adapts itself perfectly to every specific requirement.
can be individually combined in the plasticmetal repair system and used for a specific
application. The freely selectable mixing ratio allows variable viscosities from liquid to
pasty. Particularly practical and economical: Also ideal when very small amounts are required,
because mixed material can be stored without problems and is instantly available for subsequent
work. plasticmetal is available in the metal powder variants:
- 14 metal powders and
- 6 hardening liquids
- Ferro
- Ferro Superior light
- Ferro Superior dark
- Steel
- Steel Superior
- Aluminium
- Aluminium Superior
- Bronze
- Brass
- Copper
- Red brass
- Iron oxide
- Alloy
- Model Ceram
Freely combinable with the hardening fluids
- standard
- HF fast - fast curing
- HF slow - slow curing
- HF WF - increased resistance to heat
- HF SF - increased blasting resistance
- HF Thixo - increased stiffness
plasticmetal: convincing properties, decisive advantages
- applicable directly at the place of work with no special knowledge
- no use of machines necessary
- freely combinable metal powder/hardener system
- freely definable mixing ratio for variable viscosity (liquid to pasty)
- simple mixing without scales
- controlled curing
- excellent metal finish
- very good adhesion to all metals
- high compressive and tensile strength
- high resistance to abrasion and wear
- resistant to constant temperatures up to 250 °C
- resistant to chemicals
- can be painted over
